A nickel oxide nanoflakes/reduced graphene oxide composite and its high-performance lithium-storage properties

Journal of Solid State Electrochemistry - Since conventional graphite-based anode possesses a low capacity, seeking for high-capacity anode candidates becomes significant for constructing emerging...     

Investigation of mononuclear,dinuclear, and trinuclear transition metal (II) complexes derived from an asymmetric Salamo‐based ligand possessing three different coordination modes

A new asymmetric Salamo‐based ligand H₂L was synthesized using 3‐tert‐butyl‐salicylaldehyde and 6‐methoxy‐2‐[O‐(1‐ethyloxyamide)]‐oxime‐1‐phenol. By adjusting the ratio of the ligand H₂L and Cu (II), Co (II), and Ni (II) ions, mononuclear, dinuclear, and trinuclear transition metal (II) complexes, [Cu(L)], [{Co(L)}₂], and [{Ni(L)(CH₃COO)(CH₃CH₂OH)}₂Ni] with the ligand H₂L possessing completely different coordination modes were obtained, respectively. The optical spectra of ligand H₂L and its Cu (II), Co (II) and Ni (II) complexes were investigated. The Cu (II) complex is a mononuclear structure, and the Cu (II) atom is tetracoordinated to form a planar quadrilateral structure. The Co (II) complex is dinuclear, and the two Co (II) atoms are pentacoordinated and have coordination geometries of distorted triangular bipyramid. The Ni (II) complex is a trinuclear structure, and the terminal and central Ni (II) atoms are all hexacoordinated, forming distorted octahedral geometries. Furthermore, optical properties including UV–Vis, IR, and fluorescence of the Cu (II), Co (II), and Ni (II) complexes were investigated. Finally, the antibacterial activities of the Cu (II), Co (II), and Ni (II) complexes were explored. According to the experimental results, the inhibitory effect was found to be enhanced with increasing concentrations of the Cu (II), Co (II), and Ni (II) complexes.     

Global strong solution of 3D tropical climate model with damping

We establish the global well-posedness of a strong solution to the 3D tropical climate model with damping. We prove that there exists the global and unique solution for α, β, γ satisfying one of the following three conditions: (1) \alpha ,\beta \ge \mathrm{4}; (2) ; (3) .     

基于气体浓度定量的嗅觉刺激器优化设计

现有的基于磁共振测量的嗅觉刺激器，通过调节嗅剂液体浓度的方法可以实现不同浓度的嗅觉刺激，但随着实验进行，受到嗅剂挥发以及实验环境（温度、湿度、气流量）变化的影响，很难确保输送至鼻腔的嗅剂气体浓度的稳定性，进而影响实验结果的准确性．本研究对本实验室前期开发的嗅觉刺激装置进行改进，实现了气体浓度精确定量．改进后的嗅觉刺激器主要分为三个部分：控制系统、反馈系统和气路系统．控制系统主要实现气路系统的送气控制和嗅剂气体浓度调节；反馈系统则负责对气体浓度进行测量；气路系统则在原有基础上添加活性炭装置，降低无关因素干扰．装置改进之后，不同气路切换时间为75.2 ms，比原装置减少了1 s，有效提高刺激精度．实验结果显示，气体浓度调节前，300 s内乙醇、吡啶、乙酸戊酯嗅剂气体浓度分别下降6.7%、71.4%、79.2%，嗅剂气体浓度短时间内发生较大改变．加入气体浓度调节功能后，当气体浓度下降至目标浓度的90%时，可通过调节气泵电压改变嗅剂气流与空气气流比例，从而调节嗅剂气体浓度至目标值，其中吡啶、乙酸戊酯用时13 s．     

细胞松弛素B阻断微核法鉴定男性个体辐射敏感性的方法初探

初步研究了男性个体辐射敏感性的鉴定方法及标准。采集50名男性志愿者的外周血，分别给予不同剂量X射线照射，采用细胞松弛素B阻断双核法测定微核率(MNF)，通过二阶多项拟合法，绘制微核剂量效应选项中心标准曲线，将个人微核剂量效应曲线与标准曲线比对后判断个体辐射敏感性。 $0.0\sim2.5 $ Gy剂量范围内，剂量效应二阶多项拟合的中心方程为(MNF=0.014 7+0.036 2D+0.023 1D 2， r=0.726)。50名志愿者中，辐射敏感的有13人，辐射抗性的有14人，基本符合正态分布。Spearman秩和相关分析结果显示，MNF在各个辐射剂量点与辐射敏感性均存在正相关,与辐射抗性呈负相关,MNF随剂量增加而增加。本研究初步建立了“以线代点”男性个体辐射敏感性鉴定方法,并发现男性外周血淋巴细胞的本底微核率与个体辐射敏感性呈正相关。     

Demonstration of joule-level chirped pulse amplification based on tiled Ti:sapphire amplifier

A novel tiled Ti:sapphire(Ti:S)amplifier was experimentally demonstrated with>1 J amplified chirped pulse output.Two Ti:S crystals having dimensions of 14 mm×14 mm×25 mm were tiled as the gain medium in a four-pass amplifier.Maximum output energy of 1.18 J was obtained with 2.75 J pump energy.The energy conversion efficiency of the tiled Ti:S amplifier was comparable with a single Ti:S amplifier.The laser pulse having the maximum peak power of 28 TW was obtained after the compressor.Moreover,the influence of the beam gap on the far field was discussed.This novel tiled Ti:S amplifier technique can provide a potential way for 100 PW or EW lasers in the future.     

水化硅酸钙纳米压痕分子动力学模拟方法优化

针对水化硅酸钙纳米压痕模型忽视了压头与基底之间相互作用的问题，由尺寸差异引起的金刚石压头难以计算的问题，以及Wittmann模型无法得到实际接触面积的问题，提出了新的模型与计算方法．结合分子动力学方法，采用金刚石压头-Wittmann模型基底的组合方式构建无定形态水化硅酸钙纳米压痕试验模型．在建模阶段，考虑到压头模型与基底模型粒子间尺寸差异，提出了等比例替换模型，通过公式推导并就不同尺寸模拟结果验证了等比例替换模型的可行性．在计算阶段，提出了局部前处理的弛豫方法进行模拟．确定最大荷载位置处的接触面积为546 nm2，进而求出水化硅酸钙模型硬度H为0.84 GPa、折合模量Er为30.52 GPa．并通过纳米压痕试验，验证了模拟结果的准确性，证明了模型的科学性，对今后水化硅酸钙(C-S-H)纳米层面的模拟具有重要借鉴意义．     

A no expanding breather theorem for noncompact Ricci flows

Annals of Global Analysis and Geometry - In this note we show that, under certain curvature positivity conditions (the weak $${\text {PIC}}-2$$ condition or the nonnegative bisectional curvature...